Foshan Bailinshi Building Materials Co., Ltd._PC endurance board_PC corrugated tile_PC particle board

Many people who buy endurance boards feel that it is too expensive to have a master install them, so I install them myself. But if you don't understand the usage skills of the device, the application effect of the product will be greatly reduced. PC durable board, also known as polycarbonate solid board, PC bulletproof glass, and PC durable board, is made of high-performance engineering plastic polycarbonate.

PC durable board is suitable for interior and exterior decoration of public equipment such as commercial buildings and military industries. The installation technology of PC durability board is very important. Let's take a look. Firstly, the preparation work before the installation of the durable board will affect the separation of the joint filler and the hollow board. Therefore, before installation, please remove the fixed part and the surrounding 5-10 mm maintenance membrane board during sawing, and the hollow board can be opened with a cutting machine. If using a chainsaw, pay attention to removing dust from the sawing machine. When the endurance board needs to be cut with a chainsaw, the edges of the board must be flat. If it is serrated, it is particularly prone to stress cracking. When drilling holes on the board, special tools need to be used to lubricate the edges of the holes evenly. If they are serrated, they can cause stress cracking. Be careful not to deform the plate when drilling.

There are two types of adhesive tape: one can isolate dust to obtain moisture; Another option is to isolate dust but provide ventilation. When selecting, it is recommended to use the first type for board edges that are located at a higher position and do not pose a risk of water ingress; For other types, it is recommended to use the second type.

Inquiry Form

Installation method of endurance board

Inquiry Form

Installation method of endurance board

分享至微信分享